Operating The Radio - RCA Scenium RT2660 User Manual

Operating your Receiver

Operating the Radio

The receiver has a built-in tuner that allows for
FM/AM radio function.
Manual tuning
1. Connect the FM and AM antenna accordingly (see
"Connecting the Antenna" on page 5 section for
details)
2. Press SOURCE or
to switch on the receiver from Standby Mode. If
using the remote control, press ON/OFF or one of the
source keys to switch the unit on.
3. Press SOURCE or
or AM•FM on the remote control to enter TUNER
mode.
FM/AM
SOURCE
4- To select band, press the FM/AM button on the
main unit or AM•FM on the remote control to tog-
gle between AM/FM mode.
FM/AM TUNING MEMORY
SOURCE
16
keys on the main unit
FM/AM
SOURCE
keys on the main unit
TU
5- Tune the stations by pressing TUNING UP or
DOWN on the main unit or REVERSE or FORWARD
on the remote control repeatedly until the desired
station is found.
Alternatively, you can press and hold the respective
buttons for about one second to activate the
automatic SEARCH function. In this mode the receiver
will automatically tune frequencies until it finds a
station
FM/AM TUNING MEMORY
NOTE
1. If there is interference, modify the location
of the antenna until the optimal sound is heard.
TV and other electronic devices could be the
cause of interferences so try to position the
antenna away from them.
2. Weak signal can affect the "auto Search
function". Adjust the antenna for better recep-
tion for more efficient search.
Select sound effect if needed by pressing Preset EQ or
DSP sound (see "Advance sound section" for details).
Selecting Mono or Stereo Sound
Press ST/M on the main unit or the DIGITAL button
on the remote control to toggle between mono and
stereo sound in FM tuner mode (when available).
TUP TEST TONE EQ DIGITAL INPUT
SURR. MODE DSP MODE
ST/M
OK
OPEN/CL