Table of Contents
Advertisement
After clicking the Add button, the following page will be available.
Select the WAN service interface. Options to choose from are ATM/PTM Auto
Detected, atm0/(0_8_35), and ptm0/(0_1_1).
Click the Back button to return to the previous page.
Click the Next button to continue to the next page.
After clicking the Next button, the following page will be displayed. Here we can
configure the WAN service.
Parameters that can be configured are the following:
Enter Service Description: Enter the description for this service.
Enter 802.1P Priority: Enter the 802.1P priority for the service.
Enter 802.1Q VLAN ID: Enter the 802.1Q VLAN ID for the service.
Select the VLAN TPID. Options to choose from are 0x8100, 0x88A8, and 0x9100.
Select the Internet Protocol Selection. Options to choose from are IPv4 Only,
IPv4&IPv6 (Dual Stack), and IPv6 Only.
Click the Back button to return to the previous page.
Click the Next button to continue to the next page.
Web User Interface Configuration
D-Link DSL-G256DG VDSL Router User Manual
Page 25
Advertisement
Table of Contents
