Turning On The Monitor - Asus BE24W User Manual

• To connect the audio cable: connect one end of the audio cable to the
monitor's Audio-in port, the other end to the computer's audio-out port.
• To use the earphone: connect the end with plug type to the monitor's
earphone jack when an HDMI or DisplayPort signal is fed.
• To use the USB 2.0 ports: Take the supplied USB Type-B to Type-A cable,
and plug the smaller end (type B) of the USB upstream cable to the monitor's
USB upstream port, and the larger end (type A) to your computer's USB 2.0
port. Make sure your computer is installed with the lastest Windows 7/Windows
8 operating system. That will enable the USB ports on the monitor to work.
• To use the USB 3.2 Gen 1 ports: Take the supplied USB Type-B to Type-A
cable, and plug the smaller end (type B) of the USB upstream cable to the
monitor's USB upstream port, and the larger end (type A) to your computer's
USB 3.2 Gen 1 port. Make sure your computer is installed with the lastest
Windows 7/Windows 8.1/Windows 10 operating system. That will enable the
USB ports on the monitor to work.
When these cables are connected, you can choose the desired signal
from the Input Select item in the OSD menu.
2.6

Turning on the monitor

Press the power button
power indicator
2-6
. See page 1-2 for the location of the power button. The
lights up in white to show that the monitor is ON.
Chapter 2: Setup