Philips S9321 Manual page 26

ENGLISH
28
1
2
_S9321.indd 28
removed from the cleaning cartridge (see
'Preparing SmartClean System For Use').
C
4 Shake off any excess water from shaver
before placing in the SmartClean System.
C
5 Hold the shaver head side down above the
shaver holder.
C
6 Place the shaver into the holder (1), push
3
shaver back (2) and press down the top
cap to connect the shaver (3) (click).
The shaver will only fit in the SmartClean System
in one direction.
7 The battery and ON/OFF symbol blink to
indicate shaver is charging.
8 Press the ON/OFF button on the
SmartClean System to start the cleaning
cycle.
C
9 The ON/OFF button and cleaning symbol
will light up continuously.
◗ The cleaning cycle takes approximately 10
minutes.
6/26/14 3:15 P