Connecting A Subwoofer - RCA P61300 User Manual

Rca p61300: users guide
Hide thumbs Also See for P61300:
Table of Contents

Advertisement

Setup and Connections

Connecting a Subwoofer

To connect a subwoofer to the TV:
1.
Connect the subwoofer's audio input to the LFE/SUBWOOFER OUT jack. Note that if
you use the DIGITAL AUDIO OUT jack and set the Optical Output to anything other
than Off, the LFE/SUBWOOFER OUT jack is disabled. If this is the case, you should
connect the subwoofer to an A/V receiver instead of the HDTV.
Connecting a Wireless Transmitter
To connect a wireless transmitter (for wireless speakers, wireless headphones, etc.):
1.
Connect the transmitter's audio input to the TRANSMITTER OUT jack. Make sure to
connect the right audio cable to the right audio jack and the left audio cable to the
left audio jack. The right audio connector is usually red and the left audio connector
is usually white.
2.
Specify that you have connected a wireless transmitter by pressing MENU on the
remote control, selecting Audio, then Special Audio, then Wireless Audio. Select the
appropriate variable audio output. For more information, see the section in this
book, "Adjusting TV Controls."
Connecting a Stereo Amplifier
1.
Connect the amplifier's TV audio inputs to the left and right FIX/VARIABLE OUT jacks.
2.
You may prefer to turn off the TV's internal speakers by selecting a speaker
configuration with external speakers. Select Audio from the main menu and then
select Speakers.
Important: Do not use the amplifier's PHONO inputs. Consult the amplifier's owner's
manual for the manufacturer's recommended hookup.
TELEVISION
LEFT
CENTER
SUBWOOFER
LEFT
SURROUND
Arrange the speakers in your TV room to achieve
maximum sound quality.
RIGHT
RIGHT
SURROUND
TRANSMITTER OUT
R
L
LFE/SUB WOOFER
OUT
R
L
FIX/VARIABLE OUT
The FIX/VARIABLE OUT
jacks on the back panel
provide a fixed or
variable audio signal.
When set to "variable"
via the Audio menu, they
are ideal for use with an
audio amplifier that does
not have its own remote
volume control. When set
to "fixed," the output
volume stays the same no
matter how the volume
changes on the TV.
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rca - 1999 tocom 15469270

Table of Contents