Channel Guide - RCA P60100 User Manual

Channel Guide

The channel guide feature lets you
display a still picture of several
channels at the same time so you can
quickly review what programs are
available.
Note: Channels 2-13 were programmed
into the channel memory at the factory.
These are the channels that will appear
during channel guide unless you
autoprogram the channel memory or add
and erase channels as described on
page 24.
DISPLAY
MUTE
1
4
7
INPUT
CLEAR
PIP
ZM IN
ZM OUT
Starting Channel Guide
(with remote only)
To start channel guide, press the
CH GUIDE button.
Note: The remote control must be in the
"TV Mode". Pressing the TV button puts it
in the "TV Mode".
• The screen will display all the
channels that are programmed into
channel memory, 12 at a time.
• Each little screen will display a stop-
action picture that will be
continuously updated.
• While the 12 channels are on the
screen, you can use the ZM OUT
button to enlarge the picture and then
use the arrow buttons to move around
the screen. To return to normal size,
press ZM OUT.
Note: When using the zoom feature, you
will see a mosaic pattern as the picture is
made larger.
Stopping Channel Guide
• To select one of the channels being
displayed in the channel guide, press
the two corresponding number
buttons for that channel. That will
stop channel guide and take you
directly to the channel you selected.
VCR 2 • LD AUDIO
REW PLAY FF
REC STOP PAUSE
SKIP
PREV CH
2 3
5 6
8 9
ANTENNA
0
•
RESET
PIP
SWAP
–
+
–
MOVE ZM IN
FREEZE
•
( ) SRS CH GUIDE
ZM OUT
13 15
23 19
11
20
• To select one of the channels being
displayed in the channel guide, press
the two corresponding number
buttons for that channel.
• Another way to stop channel guide
is to press CH GUIDE. The little
screens will disappear, and the TV
will return to the original channel
you were watching.
SWAP
+
MOVE
FREEZE
CH GUIDE
08
18
15
11