Control Panels; Sliders; Numeric Entry - RCA MM36100 User Manual

Menus and Features

Control Panels

Control Panels allow you to adjust the default settings on many features
of your monitor. You can choose a setting, enter a number, or adjust a
level such as tint or brightness. There are three types of control panels:
sliders, choice lists, and numeric entry.

Sliders

Sliders are used to make adjustments to a particular control.
To use a Slider in a menu:
1. Press the up or down arrow to select the slider control for the
feature you want to adjust.
2. Press the right or left arrow to adjust the indicator line on the slider.

Numeric Entry

A numeric entry control panel is used to enter numbers or letters.
A pointer appears underneath the column you are changing.
1. Press the up arrow to enter a number in the column above the
pointer.
2. Press the right arrow to move to the next column, then press the up
or down arrow to enter a number.
3. When you have finished entering information, press MENU or OK.
ON OFF
VCR1
DVD VCR2 AUX
MUTE
FETCH
GUIDE
OK
Arrows
MENU
1 2
4 5
7 8
INPUT
0
REVERSE PLAY
RECORD STOP
PIP
SWAP CH CTRL
If the control panel is not set at the
current time, use the left arrow to go back
over the columns and the up arrow to
make changes.
You can also enter numbers directly by
using the number buttons.
TV
DIRECTV
SKIP
GO BACK
INFO
CLEAR
3
6
9
ANTENNA
FORWARD
PAUSE
WHO
35