RCA M29500 User Manual page 15

Using Your TV and Remote
With a Cable Box: Setting the Cable Channel
The Cable Channel works with CABLE on the remote. If the Cable
Channel is set, pressing CABLE selects the channel to see cable channels.
The Cable Channel setting depends on which channel your cable box
must be on to see cable channels. The channels usually used are 02, 03,
04, 05 or 06. Consult your cable company for more information.
1.
Select the Setup menu
2.
Highlight Cable Channel
3.
Enter channel number
Controls Alarm Adjust Setup
English Français Español
Autoprogram
Label 13
Channel Memory: 13 Stored
Cable/Air: Cable
VCR 1 Channel: 00
Cable Channel: 02
Controls Alarm Adjust Setup
English Français Español
Autoprogram
Label 13
Channel Memory: 13 Stored
Cable/Air: Cable
VCR 1 Channel: 00
Cable Channel: 02
Controls Alarm Adjust Setup
English Français Español
Autoprogram
Label 13
Channel Memory: 13 Stored
Cable/Air: Cable
VCR 1 Channel: 00
Cable Channel: 03
A. Press TV to set the remote to
13
control the TV.
B. Press MENU•PROG to select the
Setup menu. This menu is
white.
Clear
13
A. Press MOVE H (down) to move
down the menu until Cable
Channel is highlighted.
B. Press E to underline the
channel.
Clear
13
A. Enter the number for your cable
box, either 02,03,04,05, or 06.
Press MOVE H (down) until
"Disabled" is displayed to turn
this feature off.
Clear
13