Connect Your Cable; Choose Your Connection; Connection To Av Components - RCA LCDX2722W User Manual

Connections & Setup

Connect Your Cable

Connect your cable or antenna to the ANTENNA/CABLE jack on the bottom panel of the TV
using a coaxial cable.
SUBWOOFER R AUDIO L
ANTENNA/
OUT OUT
CABLE
AUDIO OUTPUT

Choose Your Connection

There are several ways to connect your television, depending on the components you want to
connect and the quality of the signal you want to achieve. The following are examples of some
ways to connect your TV. Choose the connection which is best for you.

Connection to AV Components

Using the DVI Jack
Connect a component, such as an HD receiver, to the TV using the DVI jack. Connect one end
of a DVI cable (not supplied) to the DVI jack on the bottom of the TV and the other end to the
DVI Out jack on the back on the component. Then connect the audio cables to the DVI AUDIO
IN jacks (R and L) next to the DVI jack on the TV and to the Audio Out jacks on the
component.
Note: When using the DVI jack to receive your signal, all necessary information is
transferred from the receiver to the TV. Therefore, there is no need to make adjustments
in the Main Menu.
6
CABLE
R AUDIO L
IN
DVI
ˇ˝ ˇ˝ ˇ ˝ ˇ˝ ˇ˝ ˇ ˝
ˇ˝ ˇ˝ ˇ˝ ˇ ˝ ˇ˝ ˇ˝ ˇ˝ ˇ˝ ˇ ˝ ˇ˝ ˇ˝ ˇ˝ ˇ˝ ˇ ˝ ˇ˝ ˇ˝ ˇ ˝ ˇ ˝ ˇ ˝
HD receiver (RCA Scenium ATSC21, for example)
Graphics contained within this publication are for representation only.
OR
OFF-AIR ANTENNA
Chapter 1