Features; Menu; Setup Menu - RCA HD52W67 User Manual

Using the TV's Menu System
Go back
Channel setup
Preferences
Closed caption
Autotuning
Convergence
Channel setup
Go back
Signal Source
Analog Signal type
Auto channel search
Auto channel update
List and labels
Press < / > to select where you would like to
search for channels.
Go back
Language
Maximum TV volume
Curtain effect
Special features
Select your language using < or > keys.
Short-term vs. Long-term
Power Outages
The Auto channel and Auto volume settings
don't take effect after short-term power
outages (usually less than two to three
minutes). The TV will turn back on at the same
volume and channel as before the power
outage.
The Auto channel and Auto volume settings
take effect after power outages of several
minutes or more.
48

Setup Menu

...
The Setup menu lets you configure the TV to fit its surroundings and your
...
preferences. To access the Setup menu, press MENU on the remote, and then
...
... select Setup from the main menu.
...
Channel setup
Signal source Allows you to set which tuner you want to search for
channels. You can select Analog tuner or
Both...
separately, or you can select Both to search both tuners.
Cable...
Start
Analog Signal Type (available for the analog tuner only) The analog
Start
signal type was set during the initial setup. If you change how you receive
...
broadcasts through the antenna input, you must change the Signal type
setting. Choose Cable if you are using cable or a cable box for TV signals.
Choose UHF/VHF Antenna if you are using an off-air antenna for analog TV
signals.
Auto channel search Searches for channels the current tuner (analog or
digital) is receiving. Go to page 19 for more information.
Auto channel update Searches for any new channels that are not in your
channel list for the current tuner and adds them to that list.
List and labels Edit the channels in the list or choose labels for each
channel. Go to page 20 for more information.
Preferences
Language Language Allows you Language Allows you
English, Español or Français.
English...
Maximum TV volume Maximum TV volume Allows you to set how high volume turns up when Maximum TV volume Allows you to set how high volume turns up when
you press the VOL+ button. Highlight Maximum volume, then press and
...
hold OK to hear the maximum volume. Make sure the volume has not been
muted or turned down all the way.
Curtain effect Curtain effect Reveals the picture by "opening" it from the middle of the Curtain effect Reveals the picture by "opening" it from the middle of the
screen when the TV is switched on. Hides the picture by "closing" it from
the sides when the TV is switched off.
Special features Special features The Special features The
outage; Auto channel tunes the TV to the channel you specify as the
channel channel when channel when
you set in Initial volume when
Setup Setup from the main menu.
Analog tuner or
Analog tuner
Cable if you are using cable or a cable box for TV signals.
Cable
channel update Searches for any new channels that are not in your
channel update
labels labels Edit the channels in the list or choose labels for each
select your preferred language for the menus:
Auto on setting switches your TV on after a power
Auto channel Auto channel tunes the TV to the channel you specify as the
Auto on is enabled; Auto volume tunes the TV to the volume
Initial volume when Initial volume
Digital tuner to search that tuner Digital tuner to search that tuner
Digital tuner
Auto volume Auto volume tunes the TV to the volume
Auto on is enabled.
Initial
Chapter 4