Table of Contents
Advertisement
Section 4: Vehicle Operation
Disconnect the battery from the system prior to manual operation.
Operation: Insert the 1/2" diameter crank handle inside the coupler. The slot in the end of
the crank handle accommodates the pin inside the coupler to allow manual extension/retrac-
tion of the stabilizer jack. Rotate the handle clockwise to retract and counter clockwise to
extend the jack.
NOTE: The gears can be stripped out if the stab jack is manually
retracted/extended to its fullest extent and the operator continues to
rotate the manual override.
Emergency Stopping
Always carry road flares or reflective warning signs. Pull off the roadway as far as possible
for emergency stopping. Turn ON your vehicle hazard warning flashers. If traveling at
night, use three red warning indicators such as flares, reflectors or lanterns as required by the
Uniform Vehicle Code and Model Traffic Ordinance as follows:
Place the first warning indicator on the traffic side of the recreation vehicle, directed at
1.
the nearest approaching traffic.
2.
Place the second warning indicator 100 feet behind the recreation vehicle in the center
of the lane and toward approaching traffic.
Place the third warning indicator 100 feet in front of the recreation vehicle in the center of
the lane and away from the traffic approaching from behind.
NOTE: Curves and/or hills may affect the safe placement of warn-
ing indicators.
For personal safety, always stand off the road and out of the way of traffic.
50
Maintenance Record
Table of Contents
Advertisement
Table of Contents
