Audio Amplifier - RCA F27703 User Manual

Component Connections (continued)
Amplifier or Cassette Tape Deck

Audio Amplifier

Audio/Video Cables*
(such as RCA AH069G)
If your stereo amplifier is not part of a "system" that has its
own remote, connect it to the TV as shown here.
Note: If the stereo amplifier is part of a system that has its own remote,
you may choose to connect it to the TV as shown below using the
SELECT OUT jacks.
With the connection shown here, you'll be able to change and
mute volume with the TV's remote control. You'll also be able
to remotely control bass and treble functions.
Audio Cassette Recorder or Amplifier
Back of TV
If your stereo amplifier is part of a "system" that has its own
remote control, connect it to the SELECT OUT jacks as shown
here. The "fixed level" audio signal present at these jacks is also
ideal for connecting an audio cassette recorder to record audio
from the TV. This constant audio signal is not affected by
pressing the VOL buttons on the TV's front panel or the TV's
remote control.
Connection:
Connect SELECT OUT "L" and "R" to the corresponding input
jacks on the stereo amplifier or audio cassette recorder.
34
AUDIO
R/
MONO
HI-FI OUT SELECT OUT
L
R/
MONO
INPUT 1
L
CABLE/ANTENNA
R/
MONO
INPUT 2
L
S-
VIDEO
STEREO AMPLIFIER
AUDIO
R/
MONO
HI-FI – OUT – SELECT
L
R/
MONO
CABLE/ANTENNA
INPUT 1
L
Audio/Video Cables*
R/
MONO
INPUT 2 (such as RCA #AH069G)
L
VIDEO
INPUT SELECT
S-
VIDEO
1 2 OUT
Back of TV
VIDEO
INPUT SELECT
1 2 OUT
Connection:
Connect the "L" and "R" HI FI OUT jacks to the corresponding
input jacks on the stereo amplifier (such as AUX, TUNER, or CD).
Do not use the PHONO inputs. If your amplifier is not stereo
(mono), connect it to the TV's R/MONO jack. Consult the
amplifier's owner's manual for the manufacturer's recommended
hookup.
Operation:
If desired, turn off TV's internal speakers as described on page 11.
Adjust the amplifier for normal listening. Then control sound with
the VOL and MUTE buttons on the TV's remote.
CASSETTE RECORDER
OR AMPLIFIER
(STEREO)
If your amplifier is not stereo (mono), connect it to the TV's
R/MONO jack. Consult the equipment's owner's manual for the
manufacturer's recommended hookup.
Operation:
Select a TV channel and turn down the sound on the TV, or turn
off TV's internal speakers as described on page 11. Adjust sound
with controls on the amplifier or cassette recorder. If the
amplifier or cassette recorder is part of a "system" that has its
own remote, use the system's remote to adjust sound.