Using Turn Signals; Active Bending Lights - Volvo XC90 TWIN ENGINE Owner's Manual

LIGHTING

Using turn signals

The vehicle's turn signals are controlled using
the left-side steering wheel lever. The turn
signals flash three times or continuously,
depending on how far up or down the lever is
moved.
Turn signals.
Triple flash indicator
Move the steering wheel lever up or down
to the first position and release. The turn
signals will flash three times. If the func-
tion is deactivated via the center display,
the signals will flash once.
3 LED (Light Emitting Diode)
162
NOTE
This automatic flashing sequence can
•
be interrupted by immediately moving
the lever in the opposite direction.
If the turn signal indicator flashes more
•
quickly than normal, refer to the mes-
sage in the instrument panel.
Continuous flashing sequence
Move the lever up or down as far as possi-
ble.
The lever will stop in its end position and can
be moved back manually or automatically by
moving the steering wheel.
Related information
Hazard warning flashers (p. 164)
•
Adjusting light functions via the center
•
display (p. 157)

Active Bending Lights*

Active Bending Lights (ABL) are designed to
help provide extra illumination in curves and
intersections. Depending on equipment level,
3
vehicles with LED headlights* may be equip-
ped with Active Bending Lights.
Headlight pattern with function deactivated (left) and
activated (right).
Active Bending Lights follow the movement of
the steering wheel to help provide extra illumi-
nation in curves and intersections, helping to
improve visibility for the driver.
The function is automatically activated when
the engine is started. If a fault is detected in
the system, the symbol will illuminate in
the instrument panel and a message will be
displayed.
* Option/accessory.