Tools, Supplies, And Required Equipment - Traxxas X-MAXX 77086-4 Owner's Manual

TOOLS, SUPPLIES, AND REQUIRED EQUIPMENT

Your model comes with a set of specialty metric tools. You'll need to purchase other items, available from your hobby dealer, to operate
and maintain your model.
Supplied Tools and Equipment
2.5mm "T" 2.5mm "L"
wrench wrench
Required Equipment
Traxxas Power Cell LiPo Battery
(part #2890X, sold separately)
2 LiPo batteries with Traxxas
High-Current Connectors
Traxxas Power Cell LiPo batteries
recommended
Minimum: 5000mAh 11.1v 3-cell (3s)
Recommended: 6700mAh 14.8v 4-cell (4s)
REMOVING AND INSTALLING THE BODY
Your X-Maxx includes an innovative latching system for securing the
body to the chassis. To remove the body for chassis access:
1. Turn the handle 90 degrees counterclockwise to unlock the
body latch.
2. Open the latch to release the truck body from the rear
shock tower.
3. Gently lift the rear of the body. Do not lift too far or the body will
become difficult to remove.
4. Slide the body backward away from the front shock tower to
release the front body tab. (Installation of the body is the reverse
of removal.)
5. Practice this a few times until you become familiar with the
latching mechanism. The more you do it, the faster you will be.
*Battery and charger style are subject to change and may vary from images.
2.0mm "L" 17mm wheel nut
wrench wrench
EZ-Peak Live
(part #2971,
sold separately)
LiPo battery charger
Optional spur gear
Battery pack spacers (speed gear)
Traxxas Power Cell Batteries
™
(part #2914,
sold separately)
4 AA alkaline
batteries
For more information on
batteries, see Use the Right
Batteries on page 13.
Recommended Equipment
These items are not required
for the operation of your
model, but are a good idea to
include in any R/C toolbox:
• Safety glasses
• Traxxas Ultra Premium Tire
Glue, Part #6468 (CA glue)
• Hobby knife
• Side cutters and/or needle
nose pliers
• Phillips screwdriver
X-MAXX • 7