Pioneer A-70DA-K Service Manual page 39

5
[4-4] Attach the Volume Knob (Case of A-70DA-K, A-70DA-S)
(1) Rotate the Volume Shaft to MIN side fully.
(2) Attach the Volume Knob to the Volume Shaft
at the position where the Stopper Pin of
Volume Knob does not enter the protrusion
of Sub Panel.
(3) Rotate the Volume Knob to MIN side fully.
(Stopper Pin contacts the Volume S Cushion.)
(4) Press the Volume Knob against MIN side
softly and tighten the first Volume Screw
using the screwdriver (hexagonal 1.5mm)
securely (8kgf • cm).
∗1: When you tighten the Volume Screw, pay
attention to the Volume Knob so that it
does not tilt against the Panel (AL).
∗1
Volume Knob
Panel (AL)
(5) Rotate the Volume Knob to MAX side so
that the hole of second Volume Screw fits
the position of screwdriver that has secured
the first Volume Screw.
(6) Tighten the second Volume Screw using the
screwdriver (hexagonal 1.5mm) securely
(8kgf • cm).
5
6
Sub Panel
Volume S Cushion
Stopper Pin
3
Volume Knob
5
A-70DA-K
6
7
Volume Shaft
1
Protrusion
2
Volume Knob
Screwdriver
(Hexagonal 1.5mm)
4
6
7
8
A
B
C
D
E
F
39
8