Ac Power Operation; Removing The Battery Pack From The Player - RCA DRC618N User Manual

Before Using
If the power is switched on while the battery pack is
E N E N
not fully charged, the player operation may
sometimes become unstable. Be sure to charge the
battery pack fully before using.
The battery pack is being recharged slowly while the
player is playing with AC adapter connected.
The battery pack is being recharged while the player
is at STAND BY mode with AC adapter connected.
After connecting the battery pack and power on,
press OSD button on remote control at PLAY
PAUSE or STOP status to show symbol
This symbol indicates capacity of the battery pack.
While the battery pack has lower capacity,
will be flashed to remind you.

AC power operation

1 1
Connect the DC output plug of the AC adapter to the DC IN jack on the player.
2 2
Connect the AC adapter to a power outlet.
Now the player can be operated.
CAUTION:
Be sure to use the AC adapter provided with the player.
Before inserting or removing the DC output plug of the AC adapter, always be sure to turn off
the power of the portable DVD player.
Removing the batter y pack from the player
The battery pack can be removed from the player as described below.
1 Turn off the power of the player.
2 Turning the battery knob anti-clockwise to remove battery pack.
" "
.
" "
22
-EN
Graphics are for representation only. Your unit may differ slightly.