Install The Display Unit - Sony SU-PF1 Instructions Manual

Floating stand
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Install the Display Unit

WARNING
If you allow the mains lead to be pinched under or between pieces of equipment, this may result in a short
circuit or an electric shock.
If you stumble over the mains lead or the Display Interface Cable, the stand may topple over, and cause injury.
Draw the mains lead and the Display Interface Cable through the hole on the
stand.
Decide on the installation location and lay the stand down before installing the Display Unit.
Since the Display Unit is heavy, it is recommended that you decide on the installation location beforehand and
lay the stand down there before installing the Display Unit on the stand.
Note
Do not push or pull the stand while it is on the floor. The rubber footings on the base of the stand may come off.
1
Connect the mains lead and the
Display Interface Cable to the
Display Unit.
z Tip
See the instruction manual of the Sony
Flat Panel Colour Television or LCD Color
Television for more details on connecting the
mains lead and the Display Interface Cable.
Notes
• If the weight of the Display Unit is placed on
the speakers, deformation or a loose
connection of the speakers may result. To
avoid this, observe the following. (KLV-
L42MRX1, KDL-L42MRX1(UK) only)
– Do not hold the speakers when carrying
the Display Unit.
– When connecting cables to the Display
Unit, place packing material, etc. on the
floor and lay the Display Unit face down
on it so that the speakers on either side of
the Display Unit are clear of the packing
material, etc.
• Be sure to place the Display Unit stably.
• Use soft cloth to protect the screen of the
Display Unit from damage or dirt.
Illustrations without model names that appear from now on are based on the Flat Panel colour television KLV-
L42MRX1, KDL-L42MRX1(UK).
Rear side of the Display Unit
Soft rag
KE-42MR1/KDE-P42MRX1/KE-P42MRX1/
KE-50MR1/KDE-P50MRX1/KE-P50MRX1
Speaker (left)
Soft rag
Speaker (right)
KLV-L42MRX1/KDL-L42MRX1(UK)
Mains lead
Display
Interface Cable
Packing material, etc.
Rear side of the
Display Unit
Mains lead
Display Interface
Cable
7
(GB)

Advertisement

Table of Contents
loading

Table of Contents