Settings; System Info; Additional Information; Tips And Troubleshooting - RCA Pearl TH1100 User Manual

Player's Menus

Settings

Press to enter the Settings menu and then
press or to highlight an item. Press
repeatedly to change settings.
Backlight:
• to adjust the time before the display light
turns off (On/10s/20s/30s).
• to adjust the color of the display light
(Red/Blue/Green/Yellow/Cyan/Purple/White).
Power Save(Off, 1m, 2m, 5m and 10m): to
adjust the duration for automatic shut down
when the player is idle.

Additional Information

Tips and Troubleshooting

• Problem: Player repeats same tracks or all
tracks.
– Repeat play is turned on. Refer to the Repeat
section on page 16 on how to access and
change the repeat setting.
• Problem: Audio distorted at high volume.
– Change the DSP mode to Flat.
– Turn down the volume.
• Problem: The audio tracks on my player keep
skipping or popping.
– You'll need to re-record the audio track – make
sure you close all other applications on your PC
when you record.
– Try recording with Error Correction setting
turned on.
• Problem: Player turns itself off.
– Your player turns itself off if you leave it in
pause mode or navigation mode for the
duration specified in Power Save setting.
Language: to select the menu's language.
Restore Defaults: to reset all menus to factory
defaults.

System Info

Press to show the amount of free space
available and the firmware version.
• Problem: The player cannot be turned on.
– Battery is empty.
– Ensure the keys lock is not activated.
– Reset the player by removing and re-installing
of the battery.
– If the player still cannot be turned on after
resetting, perform a firmware upgrade to
restore it.
– Please go to http://www.rcaaudiovideo.com/faq
for more details.
• Problem: Player does not respond to key
presses.
– If your player stops responding to key presses,
you can reset it by removing and re-installing
of the battery. Most of your settings will be
preserved; only the settings that you have
changed after your last power off will be lost.
– Make sure the Hold switch is not on by sliding
the "Power on/off (
left."
)/Hold" switch to the
EN
17