Table of Contents
Advertisement
7-2. Firmware Update
The FLASH ROM (NAND) software can be updated by SD memory card.
7-2-1. Version display method
The version of system in this camera recorder is displayed in MAINTENANCE menu screen.
1. Turn the power on.
2. Press MENU button to display the setting menu.
3. Select the MAINTENANCE menu and touch "MAINTENANCE" to open the MAINTENANCE menu.
4. Select the item "VERSION" (Touch "VERSION") to display the version of system in this camera recorder.
MAINTENANCE
VERSION
UPDATE
HOUR METER
RETURN
7-2-2. Update with the SD memory card
CAUTION: Before Updating Software
●
Do not power down or pull card while upgrading.
or part writing condition and the restart is not made. However software can not be updated, please contact
Panasonic Service Engineering.
< External Power >
The update can not be executed while the camera is operating on battery power. Please use the AC adapter.
< Preparation for SD memory card >
1. Buffer memory size in SD memory card more than file size of update file (hdc file) is needed, and use an SD
Memory Card which has already been formatted for this unit.
NOTE: Be sure to format SD memory card on this unit.
< Copy the update file >
1. Download update file data "VSI*****.zip" for the update from "Support Desk" web site.
2. Copy the file "VSI*****.zip" to hard disk of your PC and extract the file.
3. Insert the formatted SD memory card into the PC's card slot. Then copy the extracted update file
"UPDATE.HDC" to the root directory(*1) of the card. For example, if the SD Card folder is on D drive, the file's
location will be described as D UPDATE.HDC.
(*1): Root directory = top-level directory of the file structure.
VERSION
RETURN
EXIT
If the program quits during loading, the data will be erased
Ver. 1.00-00-0.00
EXIT
Advertisement
Table of Contents
