Table of Contents
Advertisement
---------------------------------------------------------------------------------------------------------
Note:
1. If FreeSync Premium is "ON", then the Over Drive selection is set to
"Normal" automatically.
2. If FreeSync Premium is "OFF", then the user can set Over Drive to
either one of the three settings including: (a) Extreme (b) Normal (c) Off.
7.
Refresh rate num: Display the panel's current refresh rate on the screen.
-----------------------------------------------------------------------------------------------------------
Note: If Adaptive-sync set "On" you can see the V Frequency to changes
in the OSD.
8.
VRB: To choose VRB on, off, Extreme.
9.
Ultra-Low Latency
switching process.
---------------------------------------------------------------------------------------------------------
Note:
•
Ultra-Low Latency is not support PIP/PBP.
•
Ultra-Low Latency is not support video interlace mode.
•
Ultra-Low Latency is not supports V-Frequency below 48Hz.
•
Ultra-Low Latency is not supports resolutions below 800x600.
•
Ultra-Low Latency is support only Wide Mode = Full and gray out.
Adaptive-sync is "Off", Ultra-Low Latency can control "On" or "Off".
•
•
Adaptive-sync is "On", Ultra-Low Latency is auto setting to "On" and gray out.
•
10.
Aim point: Show an Aim point on the screen for shooting games.
---------------------------------------------------------------------------------------------------------
Note:
If hot key meau or main menu is trigger the"Aim point" temporarily closed.
:Set to On to speed up the processing time of the display
Hide quick links:
Advertisement
Table of Contents
