Connecting Lyra Micro Jukebox To The Computer; Transferring Files To Lyra Micro Jukebox - RCA Lyra RD2760 User Manual

Connecting Lyra Micro Jukebox to the Computer

Connect the Lyra Micro Jukebox to your computer with the mini USB cable provided.
Battery charging will commence as soon as the screen below appears. Turn on the unit
by pressing the ON/PLAY button. The Lyra Micro Jukebox will appear as a Removal Disk
drive letter.
Note: It might take several seconds for the device (the Lyra Micro Jukebox) to be
detected, especially in Windows 2000/XP. Click Refresh in My Computer or
Explorer to make sure the device has been detected.
Note: The Lyra Micro Jukebox is capable of transferring files at hi-speed mode of
USB 2.0. This is up to 40 times faster than USB 1.1. If USB 2.0 port is available on
your computer, use it to connect to your Lyra Micro Jukebox. The Lyra Jukebox is
still backward compatible with the older USB 1.1 ports. However, you will not be
able to take full advantage of the potential speed increase.
LINE OUT
LYRA MICRO LYRA PERSONAL
JUKEBOX
JUKEBOX
(TOP VIEW)

Transferring Files to Lyra Micro Jukebox

You can transfer files to your Lyra Micro Jukebox via MusicMatch Jukebox or via Windows
Explorer.
If your Lyra Jukebox isn't already connected to your computer, connect the Lyra Jukebox
to the computer using the provided USB cable as illustrated above.
Note: Do not disconnect the USB cable during music download. Doing so may
corrupt system files or the files being downloaded. It is hoghly recommended that
the Lyra Micro Jukebox be connected to the ROOT USB PORT on the PC or a self
powered USB hub.
Getting Started: Software Setup
DC IN
5V
USB PORT
COMPUTER
15