Beko DWI645 Manual page 12

m m
1 5
Ensure that door furniture is fitted properly and check that the door does not catch
any other surface to ensure the door is closed smoothly.
5
How to use
Water hardness & regeneration settings
The dishwasher requires lime free water. Hard water leaves watermarks on your
dishes. Your dishwasher has a special water softening system to remove the
hardness of the tap water. Setting this system correctly will increase the washing
effectiveness.
To find out the water hardness level of water in your area, contact your local
Water Board or Determine water hardness level by the help of test strip provided.
If you move to a different location, the level of water hardness
will possibly be different. It is essential to reset the water
hardness in order to obtain optimum washing efficiency.
Test Strip
a
b
Remove the Let the water
test strip from flow from your
its packing. tap for 1 minute.
c
d
1 second
Take the test strip
Fill a glass with
out of the water and
tap water and
dip the test strip shake it.
into water for 1
second.
e
f
1 minute
Hold for Set the water hardness level of your dishwasher
1 minute.
according to the result shown by the test strip.
11 GB
Make sure your
dishwasher is perfectly
level using the adjustable
feet.
When the appliance is
correctly levelled, the
door will not catch on the
inner liner on either side
of the cabinet.
If the door does not
close correctly, loosen
or tighten the adjustable
feet, until the machine is
perfectly level.
Level 1 No Lime
Level 2
Very low lime content
Level 3 Low lime content
Level 4
Medium lime content
Level 5
High lime content
Very High lime content
Level 6