Care And Maintenance - Sennheiser 960-000733 Instruction Manual

Care and maintenance

For reasons of hygiene, you should replace the ear pads, the inside dust
covers and the headband from time to time. Spare parts are available from
your Sennheiser partner. To find a Sennheiser partner in your country, search
at www.sennheiser.com.
Clean the product only with a dry and soft microfiber cloth (supplied).
X
X Store the product in a clean, dust-free place, e.g. in its storage box.
Cleaning and replacing the dust covers made from 3D Mesh
Pull the dust covers away from the ear cups without touching the trans-
X
ducers underneath if possible.
Rinse the dust covers under running lukewarm water and let them air dry.
X
Put the dust covers back in place and carefully tuck the edges underneath
X
the ear pads.
Replacing the ear pads
Grasp behind the ear pads and pull them up and away from the ear cups.
X
Make sure to not damage the metal gauze and the transducers on the
inside of the ear cups.
Place the new ear pads onto the ear cups and attach the ear pads by
X
pressing firmly around them.
Replacing the headband
Hold the headband firmly in the middle and detach the headband pad-
X
ding from one side to the other.
Place the new headband padding onto the headband and attach it to the
X
headband's latches, starting from the middle and moving outwards.
Care and maintenance
HD 800 | HD 800 S | 5