Explanation Of Input Jacks And Cables - RCA DRC500L User Manual

IB/500L Body 6/7/02 11:12 AM
Chapter 5: Additional Information

Explanation of Input Jacks and Cables

This section describes the jacks and cables you can use to make connections (only audio/video cables are packed with your DVD
Player — you can purchase cables online at www.rca.com/latinamerica or go to your local electronics store). There are several ways
to connect your DVD Player to your TV depending upon the cables you have and the jacks that are on the back of your TV.
Different jacks and cables provide a different level of performance. It's important to remember, we're talking about degrees of
picture improvement for comparison. If your TV has Component jacks (Y, Pb, Pr), S-VIDEO, and composite video (often color-
coded yellow and grouped with Audio Left and Right jacks that are white and red); Component (Y, Pb, Pr), would be considered
excellent, S-Video would be very good, and the composite video jack (yellow) would be considered good.
VIDEO
P
R
P
B
Y
58
Page 58
Component Video (Y, Pb, Pr) Jacks and Cables
The Y, Pb, Pr jacks provide optimum picture quality because the video is separated into three signals
(two signals are dedicated to the color portion of the image, and the other signal is dedicated to the
black and white part of the image).
To ensure maximum picture quality, use three video-grade cables for the connection. There are bundled
component video cables sold that are coded to match the Y, Pb, Pr jack. Component Video Input jacks
are usually found on Digital Televisions (HDTV).
Note: Also, remember to connect the left and right audio cables because the Y, Pb, Pr jacks and cables carry only
the picture signal, not the sound.