Other Information - RCA DRC480N User Manual

Other Information

Remote control won't work
• You might be in the wrong mode. To operate your DVD Player, press DVD on the remote
before you press any other buttons. If you're operating the TV, press the TV button first, etc.
(this remote operates most RCA, GE, and Proscan TVs.
• Insert new batteries in the remote.
• Operate the remote control at a distance of no more than 20 feet.
• Remove any obstacles between the remote and the DVD Player or other component. If your
DVD Player is in an entertainment cabinet, the glass doors might obstruct the remote
control from operating the DVD Player. Open the doors.
Can't advance through a movie
• You can't advance through the opening credits and warning information that appear at the
beginning of movies because the disc is programmed to prohibit that action.
The invalid icon appears on screen
The feature or action cannot be completed at this time for one of the following reasons:
• The disc's software restricts it.
• The disc's software doesn't support that feature (e.g., angles).
• The feature is not available at the moment.
• You've requested a title or chapter number that is out of range.
The picture is distorted
• Did you connect your VCR to the DVD Player? Disconnect it, and connect the VCR directly
to the TV and the DVD Player directly to the TV. See chapter 1 for correct setup and
connection information.
• The disc might be damaged. Try another disc.
Picture is distorted during forward and reverse scan
• It is normal for some distortion to appear while scanning.
A screen saver appears on the TV
• Your player is equipped with a screen saver that appears on the TV after your player has
been idle for several minutes. To make it disappear, press STOP or CLEAR on the remote.
Subtitle and/or audio language is not the one selected from the initial setting
• If the subtitle and/or audio language does not exist on the disc, the initial settings will not
be seen/heard. The disc's priority language is selected instead. Set the subtitle and/or audio
language manually through the Info Display or the player menu.
The menu is displayed in a foreign language
• The Language menu (Player Menus) is set to that language. Go to LLanguages (In Spanish,
shown as Idiomas; in French, as Langues) in the main DVD player menu and select the
Player Menus option (In Spanish, shown as Menús del Lector; in French, as Menus Lecteur)
Highlight the language you prefer, and press OK.
Play doesn't begin
• The rating of the title on the disc exceeds the rating limit set in the Ratings Limits menu.
Unlock the player and/or change the rating limit in those menus.
38 chapter 5