Table of Contents
Advertisement
Installing a hard drive
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
You can install a 3.5-inch hard drive or a 2.5-inch hard drive with a 3.5-inch adapter bracket similar to
the example shown below.
●
Slide the 2.5-inch drive into the bay adapter bracket, ensuring the connector on the drive is fully
inserted into the connector on the adapter bracket.
●
Secure the drive to the bay adapter bracket by installing four black M3 adapter bracket screws
through the sides of the bracket into the drive.
(Preparation for disassembly on page
(Access panel on page
15).
14).
Drives
31
Advertisement
Table of Contents
