Table of Contents
Advertisement
Hotel Mode
1. Purpose
Restrict a function for hotels.
2. Access command to the Hotel mode setup menu.
In order to display the Hotel mode setup menu,
please enter the following command (within 2 second).
[TV] : Vol.[Down] + [REMOTE] : AV (3 times)
Then, the Hotel mode setup menu is displayed.
(Only for TX-50DX800E)
Hotel mode
Hotel mode
Initial INPUT
Initial POS
Initial VOL Level
Maximum VOL Level
Button Lock
Remote Lock
Private Information
Change
Select
RETURN
3. To exit the "Hotel mode":
Switch off the power with the [POWER] button
on the main unit or the [POWER] button
on the remote control or pressing [EXIT] button
on the remote control.
4. Explain the Hotel mode setup menu.
Off
Off
Off
Off
100
Off
Off
Keep
ITEM
Hotel Mode
Select hotel mode ON/OFF
Initial INPUT
Select input signal modes.
Set the input, when each time power is switched on.
Selection:
Off/DVB-S/DVB-C/DVB-T/
AV/HDMI1/HDMI2/HDMI3/HDMI4
*Off: give priority to the last memory. However, Euro
Model is compulsorily set to TV.
Initial POS
Select programme number.
Selection:
Off/0 to 99
*Off: give priority to the last memory
Initial VOL Level
Adjust the volume when each time power is
switched on.
Selection/Range:
Off/0 to 100
*Off: give priority to the last memory
Maximum VOL
Adjust maximum volume.
Level
Range:
0 to 100
Button Lock
Select local key conditions.
Selection:
Off/SETUP/MENU
*Off: altogether valid
*Setup: only F-key is invalid
(Tuning guide (menu) can not be selected.)
*MENU: only F-key is invalid
(only Volume/Mute can be selected.)
Remote Lock
Select remote control key conditions.
Selected"
Off/SETUP/MENU
*Off: altogether valid
*Setup: only Setup menu is invalid
MENU: Picture/Sound/Setup menu are invalid
Private
Select private information for VIERA Cast is Keep or
Information
Reset if Hotel mode is set to [On] when TV power
on.
Selection :
Keep/Reset
•Keep: private information for VIERA Cast is keep
•Reset: private information for VIERA Cast is reset
21
Function
Advertisement
Table of Contents
