Advertisement
Volume up/down | |
Track forward | |
Play/pause music | |
Track backward | |
Mute/unmute; Open mic | |
Charge port | |
Headset LEDs | |
[ ] | Call button |
Power switch | |
Bluetooth pair button |
The first time you power on your headphones, the pairing process begins.
NOTE
*Menus may vary by device.
If your Mac is Bluetooth enabled, you can pair your headset to it.
It takes up to 2.5 hours to fully charge your headphones. The LEDs turn off once charging is complete.
TIP
To check the headphones battery status, tap the Call button [ ] while wearing your headphones. Headphones must be in idle state.
Your headphones have up to 18 hours of listening time.
Adjust the headphones for a comfortable fit.
Lengthen or shorten the band until it fits comfortably.
Play/pause music | Tap the Play/pause button. |
Volume | Toggle the Volume wheel forward (+) or backward (–) to control the volume. NOTE Set Android phone volume to medium/high for optimum sound quality. |
Track selection | Tap the Forward button or Back button to control the track selection. |
Activate voice assistant | If your smartphone has a voice-enabled assistant, press and hold the Call [ ] button for 2 seconds and wait for the phone prompt. |
Open mic | Tap the red button to hear your natural surroundings (your music/audio will pause). |
Make/Take/End Calls | You will hear an incoming call alert while listening to audio. When you take the call, your stored audio (downloaded tunes, video or podcasts) will pause. If you are listening to live streaming audio then it will mute, not pause, during your call. Once you end your call, your playback or streaming will resume. Answer a call
End a call Decline a call Call back last call (smartphone) |
Mute | During a call, press the red button. You hear "mute on/off." While muted, taking off the headphones transfers the call to your phone. |
Flexible power | When the battery is exhausted use your headphones with the provided 3.5 mm Apple cable. Use the cable to:
NOTE |
Use sensors | Smart sensors respond when you put on or take off your headphones. Putting on your headphones will:
Taking off your headphones will:
TIP Reset Sensors To reset the headset sensors, connect it directly to your computer's USB port, and place it, with the ear cups up, on a flat, non-metallic surface for more than 10 seconds. Disable sensors |
Enable HD voice | To enable HD voice (wideband), hold both the red button and Play/pause buttons for more than 6 seconds until the LEDs flash purple then blue. Repeat to disable; the LEDs flash purple then red. NOTE |
Customize | You can change the language and other settings by downloading Plantronics Hub for Windows and Mac at plantronics.com/software. You can also download the free mobile apps Plantronics Hub for iOS and Android. Plantronics Hub enables you to:
|
Support in English
Tel: 0800 410014
For warranty details, go to plantronics.com/warranty.
NEED MORE HELP?
plantronics.com/support
Plantronics, Inc.
345 Encinal Street
Santa Cruz, CA 95060
United States
© 2015 Plantronics, Inc.
All Rights Reserved.
Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license.
All other trademarks are the property of their respective owners.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the BackBeat SENSE that isn't answered in the manual? Leave your question here.