Channel Installation; First Time To Install Channels; Install Digital Or Analogue Channels; Antenna - Philips 55PUT7906 User Manual

5

Channel Installation

5.1

First Time to Install Channels

Install channels during the first TV installation
On the first TV installation, you can follow on-screen
instructions to set the menu language, network
connection, sign in Google account, select your
country and complete other basic settings for the TV.
Moreover, you can also install channels during the
first TV installation.
To install channels during the first TV installation...
1 - The first TV installation starts from Welcome
screen with language setting options, follow on-
screen instruction to complete multiple TV settings
until the channel installation part.
2 - Select Digital and Analog Channels or Only
Digital Channels to install channels. Select Skip to
skip the channel installation.
3 - Follow on-screen instructions to complete one of
the channel installation types as your selection. You
can install other types of channel installation later
on MENU > TV options > Settings > Channel.
For more details about channel installation, please
refer to respective installation instruction sections.
5.2
Install Digital or Analogue
Channels
When scan and install channels, only current TV
source channels will be scanned. If you current TV
source is DTV, the channel scan applied to digital
channels. If you current TV source is ATV, the channel
scan applied to analogue channels.
To set or change TV source, press SOURCES and
select DTV or ATV.
5.3

Antenna

Antenna Installation
Please note that before installing channels, you
should first change the Channel Installation Mode to
the one you want to install. For the Antenna channel
installation, you need to change Channel Installation
Mode to Antenna first and then start the installation.
To install Antenna channels...
1 - Press Home > Settings > Channel > Channel
Installation Mode and press OK.
2 - Select Antenna and then go back to Channel.
3 - Select Channels > Channel Scan and
press OK.
Alternatively, while watching a TV channel, you can
perform the channel scan by...
MENU > Navigation Keys up
> Channels > Channel
5.4

Channel Installation Options

Channel Skip
You can skip the channels you do not want to watch.
To set the skipped channels ...
1 - While watching TV, press MENU > TV
options > Settings > Channel > Channels and
press OK.
2 - Select Channel Skip* and press OK.
3 - Select the channels you want to skip and
press OK. The check mark is shown.
4 - Press Back, repeatedly if necessary, to close the
menu.
* Note: You cannot skip the current watching channel.
Channel Edit
You can edit the channels from the channel list.
To edit the channels ...
1 - While watching TV, press MENU > TV
options > Settings > Channel > Channels and
press OK.
2 - Select Channel Edit and press OK.
3 - Use the Navigation keys to select the channel
and press Yellow key for Select.
4 - Edit the channel number* and channel name.
5 - Press Back, repeatedly if necessary, to close the
menu.
* Note: Depending on your installation country or
operator setting, channel number editing is not
always available.
12