Briggs & Stratton 1760266 Owner's Manual page 7

OPERATION
CHECKING BATTERY CAPACITY
Note: The battery is not shipped fully charged. It is recommended to fully charge before first use
to ensure that maximum run time can be achieved. This lithium-ion battery will not develop a
memory and may be charged at any time.
Press the battery capacity indicator (BCI) button. The lights will illuminate according to the
batteries capacity level. See chart below:
BATTERY CAPACITY
INDICATOR (BCI) BUTTON
Lights
4 Green Lights
3 Green Lights
2 Green Lights
1 Green Light
Lights go out
BATTERY PROTECTION FEATURES
Briggs & Stratton 82V lithium-ion battery packs are designed with features that protect the
lithium-ion cells and maximize battery life.
If the tool stops during use, release the trigger to reset and resume operation. If the tool still does
not work, the battery needs to be recharged.
COLD WEATHER OPERATION
The lithium-ion battery pack can be used in temperatures down to -20°C (-4°F). Put the battery
pack on a tool and use the tool in a light duty application. After about a minute, the pack will
warm up and begin operating normally.
Capacity
The battery is above 80% capacity
The battery is between 80% and 60% capacity
The battery is between 60% and 40% capacity
The battery is between 40% and 25% capacity
The battery is less than 25% capacity and
requires charging immediately
7
LIGHT METER