Page 1
DateCodeGenie Label Rewinder Quick Start Guide ® model GoDEX T10 Parts Included • Label rewinder • Power adapter (24V) • 1.5" core adapters (optional) • 3" core adapters (optional) • Manufacturer User Guide • Quick Start Guide Back Label Stop Plate...
Page 2
Setup 1. Place label rewinder parallel to printer with 5 inch 2. Plug power adapter into rewinder and working outlet. Do not turn on. Press the feed button of minimum distance. Confirm printer to rewind and label rewinding shaft are in a straight line. printer to extend labels 10-14 inches.
Page 3
6. Slide the front label stop plate on label rewinding 7. Toggle the rewinding switch to "Outside" (wind shaft leaving 1 mm space between the cardboard core/ labels facing outward) and the power switch to edge of labels and the front label stop plate. Slide and "-"...
Page 4
00 44 (0)1283 527977 option 4 supportdcg@ncco.com supportdcg@ncco.com To learn more about NCCO and view a full list of our products, visit us at ncco.com. Looking for warranty information on your product? Limited- warranty information for DateCodeGenie products and third- party warranty information for accessories are all available to view and download at: support.datecodegenie.com/warranty...