Advertisement
Right earbud | ||
Power on | Click and hold 2 seconds | |
Power off | Click and hold 4 seconds | |
Play/pause* | Click 1 time (1x) | |
Next track* | Click 2 times (2x) | |
Previous track* | Click 3 times (3x) | |
Siri, Google Now | Click and hold 2 seconds | |
Call | Click 1 time (1x) | |
Bluetooth ® pairing | With the headset powered off, click and hold 4 seconds | |
Left earbud | ||
Volume up | Tap (touch sensor) | |
Volume down | Touch and hold (touch sensor) |
NOTE *Functionality varies by application. May not function with web-based apps.
Be safe Please read the safety guide for important safety, charging, battery and regulatory information before using your new headset.
The first time you power on your headset, the pairing process begins.
NOTE *Menus may vary by device.
Once successfully paired, you hear "pairing successful" and the indicator light stops flashing.
NOTE To enable caller name announcement, allow access to your contacts if your phone prompts you.
With the headset powered off, click and hold the right earbud until you hear "pairing."
NOTE You can connect up to 2 devices to your headset.
It takes 2 hours to fully charge the headset. The headset LED turns off once charging is complete.
Charge your headset for 15 minutes for up to a full hour of listening time.
Power on or off
Click and hold the right earbud until you hear "power on" or "power off."
Adjust the volume
The left earbud has a touch sensor button. Only a light touch is required.
Play or pause audio
Click the right earbud.
NOTE Functionality varies by application.
Track selection
Double-click the right earbud to skip to the next track or triple-click the right earbud to play the previous track.
NOTE Functionality varies by application. May not function with web-based apps.
Use Siri, Google Now
Your earbuds support Virtual Personal Assistants (VPA) such as Siri and Google Now.
Click and hold the right earbud for two seconds to use your device's VPA.
Make/Take/End Calls
Answer or end a call
Click the right earbud.
Answer a second call
First, click the right earbud to end current call, then click the right earbud again to answer new call.
Answer calls from a second device
It's easy to answer calls from two devices.
When on a call, you hear a ringtone notification of the incoming call from the second paired device.
To answer a second call from the other device, click the right earbud to end the current call and click the right earbud again to answer the new call. If you choose to not answer the second call, it will go to voicemail.
Get the most from your earbuds by downloading our free app, BackBeat for iOS/Android™.
With this app, you can:
The app will guide you through the first pairing process if the earbuds are not paired to the device.
For maximum benefit, install the BackBeat app on every device paired to your earbuds.
If you leave your headset powered on but out of range of your paired device, it will conserve power by entering DeepSleep mode after 90 minutes and power off mode after 7 days.
To exit DeepSleep mode, choose:
NEED MORE HELP?
plantronics.com/support
Plantronics, Inc.
345 Encinal Street
Santa Cruz, CA 95060
United States
Plantronics B.V.
Scorpius 171
2132 LR Hoofddorp
Netherlands
© 2018 Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license. Apple and Siri are trademarks of Apple Inc., registered in the US and other countries. All other trademarks are the property of their respective owners.
Patents pending.
212895-06 (08.18)
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Plantronics BackBeat FIT 2100 Series - Wireless Headphones Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the BackBeat FIT 2100 Series that isn't answered in the manual? Leave your question here.