Installing The Power Switch; Removing The Speaker; Installing The Speaker - Dell OptiPlex 3046 - Mini Tower Owner's Manual

Installing the power switch

1 Insert the power switch into the slot and press it until it clicks into place.
2 Route the power switch cable through the cable retention clip.
3 Connect the power switch cable to the connector on the system board.
4 Close the front bezel door.
5 Install the:
• bezel
• cover
6 Follow the procedure in

Removing the speaker

1 Follow the procedure in
2 Remove the:
• cover
• bezel
3 Open the front bezel
4 To remove the speaker:
a Disconnect the speaker cable from the connector on the system board [1].
b Close the front bezel door.
c Press the release tabs [2], and slide the speaker [3] and the speaker cable [4] out of the slot.

Installing the speaker

1 Insert the speaker into the slot and press it until it clicks into place.
2 Open the front bezel
3 Connect the speaker cable to the connector on the system board.
4 Close the front bezel door.
5 Install the:
a bezel
b cover
6 Follow the procedure in
After Working Inside Your
Before Working Inside Your
door.
door.
After Working Inside Your
Computer.
Computer.
Computer.
Removing and installing components 18