Cisco Nexus 9364D-GX2A Hardware Installation Manual page 25

Installing the Chassis
Installing the Switch using the NXK-ACC-KIT2-2RU Rack-Mount Kit
Step 7 If installing from the back of the rack, slide the chassis into the rack by aligning the inner rails into the outer rails, and
sliding the chassis forward until the front panel is flush with the front of the rack. Then slide the retainer screws out to
align with the rack and then secure the thumb-screws on the inner rails into the rack, as shown in the following illustration:
Cisco Nexus 9364D-GX2A ACI-Mode Switch Hardware Installation Guide
19