Temperature Control - Hamilton Beach HBF2067 Owner's Manual

Setting the Temperature Control
Your unit has one control for regulating the temperature. The temperature control is located
on the outside of the refrigerator compartment door.

Temperature Control

Default is Fahrenheit when power is on.
Press "FUNCTION" button 5 seconds, to switch between
Other buttons use the same method to switch between two modes.
Set temperature range: Celsius degree mode
1.
Fridge temperature range:
2.
Freezer temperature range:
Set temperature range: Fahrenheit degree mode
1.
Fridge temperature range:
2.
Freezer temperature range: -10~5°F(Default value 0°F)
Setting the Temperature Control
•The first time you turn the unit on, the unit will start at the factory-set default temperature, which is
41ºF(5°C) in the refrigerator compartment and 0ºF(-18°C) in the freezer compartment.
• The first time you turn the unit on, adjust the temperature in the refrigerator compartment to 37ºF(3°C)
and run for at least 4 hours before placing food inside. This will ensure that the freezer compartment is
thoroughly chilled and the refrigerator compartment is stabilized before food
is placed inside. Then adjust the temperature setting to your desired setting.
•To adjust the temperature in each zone, press the appropriate zone button. The temperature will
change according to the pre-set temperatures as shown below.
Temperature Control
2~8°C (Default value 5°C)
(Default value -18°C)
-23~-15°C
35~46°F (Default value 41°F)
Quick Cool
icon
FRIDGE FREEZER
QUICK
COOL
Quick Freeze
icon
°C and °F.
5
Smart icon
FUNCTION
QUICK
SMART
FREEZE
Mode control