Table of Contents
Advertisement
Turn the TV off with Mains Power On / Off switch, then turn it on again.
●
= Note =
Digital TV reception is only as good as the antenna and the antenna cabling
delivering the DTV signals to the television. Reliable digital TV reception
requires high quality, robust DTV signals which can only be achieved when
using a TV antenna and cabling designed for digital TV reception.
For further reading, please visit at the following website where you
●
can download 'The Digital TV Antenna Systems for Homes Handbook'
information PDF file:
http://www.digitalready.gov.au/publications.aspx
For your safety, the antenna and cabling should be inspected / installed by
●
a licensed installer that should comply with Australian Standard AS1417.1
for Domestic installations or AS1367 for MATV installations.
Sound
Before requesting service or assistance, please follow these simple guides to
solve the problem.
If the problem still persists, please contact your local Panasonic dealer for
assistance.
No sound is produced
Is "Sound mute" active? Press
●
Is the volume set to the minimum?
●
Check connections and setting of external equipment.
●
Watching > External equipment
Ensure that
Speaker Selection
●
Functions > VIERA Link "HDAVI Control™" > Speaker Selection
Ensure that
TV Speaker
●
Watching > For best audio > Volume settings
Sound level is low or sound is distorted
Sound signal reception may be poor.
●
Set
MPX
in the Sound Menu to Mono. (Analogue TV)
●
Watching > For best audio > Advanced settings
MUTE
to switch sound mute on or off.
is set to TV.
is set to On.
- 165 -
Advertisement
Table of Contents
