Digital Tv - Panasonic TH-40EX730Z Ehelp

Digital TV

Some features are not available on all models.
Before requesting service or assistance, please follow these simple guides to
solve the problem.
If the problem still persists, please contact your local Panasonic dealer for
assistance.
Due to the digital reception technologies involved, quality of the Digital TV
●
signals may be relatively low in some cases, despite good reception of
Analogue TV channels.
No satellite channel is found
Set LNB Band Frequency
●
Watching > Tuning and editing channels > Auto Tuning
Unable to receive signals with a high-performance aerial
Install an aerial individually for the TV and VCR (or use a splitter).
●
Interference or frozen / disappearing image
Check Signal Condition. If the level of
●
dish.
Watching > Tuning and editing channels > Signal Condition
Turn the TV off with Mains Power On / Off switch, then turn it on again.
●
Faulty dish message appears
The satellite cable may be short-circuited or there may be connection
●
problems of the cable. Check the cable and connection and then turn the
TV off with Mains Power On / Off switch, and turn it on again.
If the message persists, consult a dish installer for checking the dish and
●
cable.
in LNB Configuration
Signal Quality
- 297 -
to suit your environment.
is low, check aerial or