4. SETUP
4.1 Mounting
With adjustable bracket, this fixture is designed to be mounted on
4.2 Fixture linking
To run your light shows of one or more fixtures using a DMX-512 controller or to run
synchronized shows on two or more fixtures in master/slave operating mode, you need DMX
cables to link the units from DMX IN to DMX OUT.
4.3 AC Power
The fixture is designed to work on 100V ~ 240V, 50/60Hz.
Safety cables must always be used. The safety cable must
be capable of holding 10 times the weight of the fixture.
All fixtures must be connected to circuits with a suitable
9
truss..
IMPORTANT!!
Warning!!
Earth Ground.