Panasonic SA-VKX25EE Service Manual page 17

6.3.3. Doctor Mode Table 3
Item
Mode Name
Bluetooth Bluetooth module will need some
Version Check time to power up and read the
version display.
Meanwhile [_BT_ll----_] will show
before the ver. numbers appear.
2s display count should start after
flash version number appear.
Bluetooth Devices Bluetooth Address Check
Address
Confirmation
Region Check Checking for model no and
Region
Description
v = flash version (0~7),
w = flash sub version (0~F),
x = control version (0~F),
yyy = EEPROM version (0~255),
zz = EEPROM sub version (0~99),
XX is a 6 byte BD address.
If there is any error, it will show ERROR on
Left side FL display.
AD value of region pin is check and display will
show [REG YYY] based on region table.
YYY = 001 ~ 013 based on region table as below.
Region
FL Display
( 2 sec)
( 2 sec)
Model Series
1 VKX95 GA
2 VKX95 GS
3 VKX95 EE
6 VKX25 GA
7 VKX25 GS
8 VKX25 EE
11 VKX65 GA
12 VKX65 GS
13 VKX65 EE
17
Key Operation
Front Key
1. Go to Bluetooth selector and
then enter Doctor Mode.
2. Press [10] [2] [4] and
display will show.
In Doctor Mode:
1. Press [10] [2] [8] and
display will show.
In Doctor Mode:
1. Press [10] [1] [6] button
on the remote control.