12
Setting Universal Control
You can control devices such as Set-Top Box, Blu-ray Player, or Home Theater
using by Magic Remote.
•
This feature is available on certain models only.
1
Check that the device you want to set is connected to your projector.
2
Press the
button on the remote control and select
(Press the
button on the remote control.)
3
Select [All Inputs] and go to [INPUTS].
4
Select the input mode that the device is connected to in [INPUTS].
5
If you press [Set Up Universal Control], you can set up the Universal Control.
Follow the instructions on the screen to finish the setup.
•
If you want to change or cancel Universal Control Settings, go to
Inputs] and select [Edit Universal Control].
•
You can also set the Universal Control in
•
You can use this only with the Magic Remote. (The provided remote control
differ depending upon model.)
•
You can purchase the Magic Remote separately if it is not provided.
•
This feature is available in certain countries only.
•
When changing the settings, check that the device to be changed is turned on.
•
You can set one device per type.
•
If you connect to a network before setting the Universal Control, the latest
update for the supported manufacturer list becomes available.
•
Some buttons may not work depending upon the model of the external device.
•
Place the device near the projector for seamless operation.
•
If there is an obstacle in front of the device, it may not be able to receive the
signal properly. If the device is in a drawer, open the drawer.
at the top right.
[Device Connector].
[All