Download Print this page

Qlogic SANbox 5802V Supplementary Manual page 4

Fibre channel stackable switch
Hide thumbs Also See for SANbox 5802V:

Advertisement

SANbox 5802V
Fibre Channel Stackable Switch
Scalability
Ports per chassis
Eight to twenty 8-Gbps ports (upgradable in
4-port increments)
Four 10/20-Gbps XPAK MSA-compliant ports
(10-Gbps default; upgradable to 20-Gbps)
Multi-switch fabric support
All topologies including: stack, cascade,
cascaded loop, and mesh
Multiple 10/20Gb or 8Gb links between switches
Adaptive trunking, intelligent path selection
Port types
All ports are universal, auto-discovering, self-
configuring, and assume the following states:
F_Port, FL_port, E_port, G_Port, GL_Port
Performance Features
Fabric port speeds
2/4/8-Gbps, 10/20-Gbps full-duplex. All ports
auto-negotiate with slower devices or ports.
Fabric latency less than 0.2 μs
Cut-through routing
Fabric point-to-point bandwidth
1700 MBps full-duplex on 8-Gbps ports
5100 MBps full-duplex on 20-Gbps ports
Aggregate bandwidth
544-Gbps per chassis, end-to-end
Non-blocking architecture
Maximum frame sizes
2148 bytes (2112 byte payload)
Per-port buffering
ASIC-embedded memory (non-shared)
Guaranteed 16 credit multi-read port buffer for
full performance up to 13km @ 2-Gbps and
2 km @ 10-Gbps
Extended distance through credit donation
Media
Hot-pluggable, industry-standard 3.3 volt SFP+
transceivers for 8-Gbps ports
Hot-pluggable, industry-standard XPAK optics or
copper stacking cables for 10/20-Gbps ports
Compatible with 4-Gbps and 2-Gbps SFPs
Corporate Headquarters
Europe Headquarters
© 2008 QLogic Corporation. Specifications are subject to change without notice. All rights reserved worldwide. QLogic, the QLogic logo, SANbox, QuickTools, Enterprise Fabric Suite, SANdoctor, I/O StreamGuard, mPort, and vFabric are trademarks or registered
trademarks of QLogic Corporation. Java is registered trademark of Sun Microsystems, Inc.. HP is a registered trademark of Hewlett-Packard Company. IBM is a registered trademark of IBM Corporation. VMware is a registered trademark of VMware, Inc. All other
brand and product names are trademarks or registered trademarks of their respective owners. Information supplied by QLogic Corporation is believed to be accurate and reliable. QLogic Corporation assumes no responsibility for any errors in this brochure. QLogic
Corporation reserves the right, without notice, to make changes in product design or specifications.
Supported SFP types
Shortwave/longwave (optical), active copper
Maximum Media transmission ranges
Device ports (@ 2-Gbps)
Shortwave optical: 500 m (1,640 ft.)
Longwave optical: 10 km (6.2 mi.)
Stacking ports (@ 10-Gbps)
Shortwave optical: 300 m (984 ft.)
Longwave optical: 2 km (1.2 mi.)
Cable types
50/62.5 micron multimode fiber optic
9 micron single-mode fiber optic
Interoperability
Compatible with FC-SW-2 compliant switches
®
®
including Brocade
, Cisco
, and McDATA
Management interoperability with leading SAN
management applications
Fabric Management
Management methods
QuickTools web applet
Command Line Interface
Enterprise Fabric Suite 2007 (optional)
API, GS-4 Management Server (including FDMI),
SNMP, RADIUS, FTP, TFTP, SMI-S.
Access methods
10/100 Ethernet BaseT (RJ45), serial port
(RS-232 with DB9), in-band (Fibre Channel)
Diagnostics
Power-On Self Test (POST)
Optional SANdoctor fabric diagnostics software
Fabric services
Simple name server, hardware based zoning,
Registered State Change Notification (RSCN),
I/O StreamGuard, multi-chassis in-order delivery,
automatic path selection, FDMI, IPv6 support
User interface
LEDs, command-line console, and web utilities
* The 5802V supports virtual fabric capabilities available with future vFabric software release.
QLogic Corporation
26650 Aliso Viejo Parkway
QLogic (UK) LTD.
Quatro House
Lyon Way, Frimley
50902-00 B
Mechanical/Power/Cooling
Dual, hot-swap power supplies, integrated fans
Optional rail mount kit
Front-to-back air pattern
RoHS compliant
Dimensions
H x W x D: 43.2 x 432 x 500 mm
(1.7 x 17 x 20 in) – dual power supply
Weight
8.16 kg (18 lbs) – dual power supply
Environmental and Equipment
Specifications
Operating
Temperature: 5° to 40°C (41° to 104°F)
®
Humidity: 10% to 90% non-condensing
Altitude: 0 to 10,000 feet
Vibration: 5-500 Hz, 0.27g, 5 sweeps
Shock: 3.5g, 3ms, half sine, 20 repetitions
Non-operating
Temperature: -20° to 70°C (-4 to 158 °F)
Humidity: 10% to 95% non-condensing
Altitude: 0 to 50,000 feet
Vibration: 2 to 200 Hz, 0.5g, 5 sweeps
Shock: 50g, 4216 mmps, 13msec, 3 axis
Electrical
Voltage: 100 to 240 VAC; 50 to 60Hz
Power load: 1 A at 120 VAC; 0.5 A at 240 VAC
Heat output: 120W maximum
Agency Approvals—Product Safety
US/Canada: UL/cUL, 60950-1
Europe: EN60950, CB Scheme-IEC 60950-1, CE,
TUV, Low Voltage Directive
Russia: GOST R
Agency Approvals—EMI/EMC
Meets Class A emissions and immunity
requirements for USA, Canada, Europe, Australia,
New Zealand, Korea, Japan
Aliso Viejo, CA 92656
949.389.6000
Camberley Surrey, GU16 7ER UK
D A T A S H E E T
www.qlogic.com
+44 (0) 1276 804 670
4

Advertisement

loading