Replacing The Filters - Bissell AIRRAM 2144 Series User Manual

Replacing the Filters

Slide the filter onto the separator.
Removing and Cleaning the Brush Roll
If the brush bar jams during use, the
AirRam will stop and the LEDs will
appear red. Before checking for a
blockage, remove the battery.
NOTE: The brush roll should be pulled first from the side near the release button.
Slide the filter back into the dirt bin.
Rest the AirRam on its side and
locate the brush roll release button.
Press and hold the release button and
pull out the brush roll.
www.BISSELL.com 11