Table of Contents
Advertisement
Getting started
Mounting the monitor base
Adjusting the inclination
The inclination of the monitor can be adjusted by -3.5° (forwards) and +22°
(backwards) from its vertical position.
► Hold the monitor with both hands on the left and right sides of the casing
and move it to the desired angle.
Removing monitor base
Before you can use a swivel arm or a similar accessory, you must remove the monitor base.
The display surface is susceptible to scratching!
1
14
► Install the base plate on the foot.
► Place the monitor in the operating position.
► Switch off the monitor and pull the power
► Lay the monitor on its face on a soft surface.
► Disconnect all cables.
► Press the tab on the underside of
2
plug out of the power socket.
the base plate firmly inwards until it
disengages (1) and then pull the base
plate out of the foot (2).
Fujitsu
Advertisement
Table of Contents
