Table of Contents
Advertisement
Hydraulic System
The Hydraulic Cylinders are designed to be used in conjunction with your tractor's Hydraulic System. The
Cylinders and Hose are designed for maximum system pressure of 2500 PSI.
Keep cylinders and hose free from internal contamination. Never leave a disconnected hose
end open. Use a sealant when attaching hydraulic hose to cylinder. Do not over tighten
fittings as this will break out the Cylinder Port Housings. When testing for a leaky hose or
connection use a piece of cardboard or wood to detect pinhole leaks. DO NOT USE YOUR
HAND. A high pressure stream of escaping hydraulic fluid can penetrate skin and cause
serious infection or reaction, in addition to physical damage to internal flesh.
HYDRAULIC PLUMBING
INSTALLATION DIAGRAM
141-181
09/20
© 2020 Alamo Group Inc.
ASSEMBLY
Assembly Section 3-6
Advertisement
Table of Contents
