Adjusting Keystone; Using The Input List - LG HW300Y/G-JE Owner's Manual

Adjusting Keystone

Use this function when the screen is
not at a right angle to the projector
and the image is a trapezoid shape.
Only use the Keystone function
when you can't get the best angle by
moving the projector.
•Keystone 0
◀
-
1
Press Key'sꔌ, Key'sꔍ to adjust the
screen condition as you want.
Keystone can be adjusted from
-40 to 40.
2
When you are finished, press EXIT.

Using the Input List

Using the Input List
1
Press INPUT to access the input
sources.
- The connected device displays on
input source, AV input is always
active.
Input List
AV USB Component RGB
2
Selecting an input signal with the
INPUT button will only change the
projector only to connected inputs.
Press the Navigation buttons to
scroll to any inputs.
Adding an Input Label
Add a label to an input source so
that you can easily identify a device
connected to each input source.
▶
+
ꔉ OK
1
2
3
4
5
ꔂ Move ꔉ OK
HDMI
Input Label ꕯ Exit
WATCHING PROJECTOR
Input Label
◀ ▶
AV
◀ ▶
Component
◀ ▶
RGB-PC
◀ ▶
HDMI
Close
Press INPUT to access the input
sources.
Press the Blue.
Press the Navigation buttons to
scroll to one of the input sources.
Press the Navigation buttons to
scroll to one of the input labels.
When you are finished, press EXIT.
17