ADS 5120D Installation & Operation Manual page 4

Table of Contents

Advertisement

INTRODUCTION
Features
The ADS 5120 and ADS 5240 are 2-zone mixer amplifiers, ideally suitable for powering
medium and large sound systems. The technically sophisticated built-in features allow a
wide range of applications at a competitive price. Furthermore, the design features make
the amplifier one of the simplest to configure and install, with no internal adjustments or
retrofit options required. Features include
220-240Vac (at 50Hz) or 24Vdc power operation
24Vdc phantom power - providing a means of distributing current through audio
cables to power microphones and other equipment
volume restoration - restoring volume levels to pre-defined factory or user-
defined settings when initiating communications in areas such as paging,
public address, two-way radio, intercoms and music distribution systems
volume sensitivity and trim controls for all inputs - allowing adjustment to the
level of the incoming microphone or line-level signals to match the internal
operating levels of the mixer unit
six inputs, the first five of which are balanced and feature
o a 'universal' input allowing simple configuration via a slide switch
o a switch-selectable phantom power supply
o a switch-selectable, two-note chime, activated when the input priority
terminal is closed
o a remote volume restoration relay able to be operated when the input
priority terminal is closed
a priority ladder for the first five balanced inputs, where
o input 1 mutes all other inputs
o inputs 2 to 5 operate on a 'first-come-first-served' basis
o input 6 has no priority
(when no priority terminal is closed, all inputs act as mixing inputs)
a switchable VOX facility on input 1
two 100V line outputs – 'Music & Speech' and 'Speech Only' (the 'Music &
Speech' output is permanently connected, providing output of all amplifier
traffic; the 'Speech Only' output is only connected when a priority is closed; this
can provide paging only, to areas where music is not desired)
separate bass (±10dB at 100Hz), treble (±10dB at 10kHz) and master volume
controls, located on the front panel
compact size, taking up only 2U of rack space (the amplifier is supplied with
19-inch rack mount ears).
Page 4 of 15

Advertisement

Table of Contents
loading

This manual is also suitable for:

5240dAds5120d

Table of Contents