Features And Specifications; Pb-136Gx - Pyramid PB1036GX User Manual

input level control use this control to match the outputs of your head unit to the amplifier.
Starting with your head unit set at about the 2 o'clock position, increase
the amp level control until distortion begins to occur, and reduce slightly
from this point.
low level inputs this amp features gold-plated RCA input jacks for high impedance input.
Use these with car stereo output which uses RCA-type connector cables.
high level inputs if your car stereo lacks RCA-type output jacks, you may connect speaker
output leads to these input connectors.
power LED this indicator is illuminated when power is applied.
power fuse the fuse protects the amplifier and your car's electrical system from short
circuit conditions.
power terminals use these connectors to deliver power, ground and remote turn-on control
to the amplifier.
speaker connections these terminals are 14K gold plated to guarantee high conductivity and
minimum signal loss.

features and specifications

output power @ 14.4v DC, 1KHz
RMS Power @ 4 Ohms
Maximum Power Output
frequency response
input impedance
low level inputs
high level inputs
input sensitivity
low level inputs
high level inputs
power supply voltage
matching speaker impedance
stereo mode
bridged mode
maximum current draw
dimensions (W x H x L)
mm
inches
2 ch amp PB-136GX
30 Watts x 2
120 Watts x 2
15 Hz-30 KHz
10K Ohms
100 Ohms
250mV
2.5V
14.4V DC Neg. Ground (10.5-16V)
2-4 Ohms
5A
278 x 81 x 209
10.9 x 3.2 x 8.25
7