Pyramid CR-82 User Manual page 4

3 PHASE SHIFTER SELECTOR (SUBWOOFER)
Allows you to change the phase of your subwoofer from 0 to 180 degrees
to help compensate for timing differences between drivers.
4 BASS BOOST CONTROL (40Hz)
Frequencies around 40Hz can be boosted at the maximum of +10dB.
5 STEREO/MONO SELECTOR (SUBWOOFER)
Set the selector to MONO to make subwoofer output monaural.
6 FLAT CHANNEL GAIN CONTROL
By turning this control clockwise you increase flat channel level.
7 SUBWOOFER GAIN CONTROL
By turning this control clockwise you increase subwoofer channel level.
8 MIDDLE RANGE CROSSOVER POINT SELECTOR
The high Pass frequency(100,150,200Hz,Flat) should match the low cross-
over point, the low frequency(2.5k,3.5k,5k,Flat)should match the high
crossover point.
9 MIDDLE RANGE GAIN CONTROL
By turning this control clockwise you increase middle range channel level.
0 PHASE SHIFTER SELECTOR(HIGH PASS)
Allows you to change the phase of your high pass from 0 to 180 degrees
to help compensate for timing differences between drivers.
q HIGH PASS CROSSOVER POINT SELECTOR
Control the high pass output at 2.5k,3.5k,5k,7k.
w HIGH PASS GAIN CONTROL
By turning this control clockwise you increase high pass channel
e POWER ON INDICATOR
The LED light up when the units is powered on.
– 4 –