Table of Contents
Advertisement
Quick Links
VEHICLE SECURITY SYSTEM
Optional Remote Start Module and 2-way Transmitter Instructions Included
STANDARD FEATURES
Some of the system's standard features include:
• 4-button remote transmitter
• LED Status indicator
• Valet switch
• Extended Range Receiver
• 125dB Multi-tone siren
• Dual stage impact detector
• Remote panic
• Remote Valet mode
• Remote chirp delete
• Remote sensor bypass
• Passive or active arming
• Flashing parking lights
• Auto Rearming
OPTIONAL FEATURES
This system has many optional features that
may require additional parts and/or labor.
Please contact your dealer for more details.
• Remote keyless entry (door lock/unlock)
• Illuminated entry
• LCD 2-way Remote
• Hood & trunk protection
• Trunk/hatch release
• Window roll-up
• Additional sensors
• Remote Start (optional plug-in module)
• Stop & Go Feature
• Auto Cold Start
Note: Some features may not be appropriate
for certain vehicles.
SYSTEM MANUAL
REMOTE TRANSMITTER BUTTONS
Button 1
Button 3
Transmitter Icons
NOTE: Transmitter cosmetics may differ
between models and between standard 1-way
and LCD 2-way transmitters, but button
functions remain the same as described below.
Each transmitter button has two operating
modes: standard and level shifted. Pressing a
transmitter button for less than one second
activates the standard function associated with
that button (such as arm or disarm). Pressing a
button for more than one second changes the
color of the standard transmitter's LED to
green and activates the level shift feature.
While the LED is green (level shifted), pressing
any transmitter button accesses another level
of commands providing expanded operation.
1
Button 2
Button 4
Advertisement
Table of Contents
Related Manuals for Pyle PWD250
Summary of Contents for Pyle PWD250
- Page 1 VEHICLE SECURITY SYSTEM Optional Remote Start Module and 2-way Transmitter Instructions Included SYSTEM MANUAL STANDARD FEATURES Some of the system’s standard features include: • 4-button remote transmitter • LED Status indicator • Valet switch • Extended Range Receiver • 125dB Multi-tone siren •...
-
Page 2: Disarming Operation
ARMING OPERATION To arm the system press transmitter button 1: • The siren will chirp once. • The parking lights will flash once.* • The doors will lock.* • The LED will turn solid for 10 seconds then start flashing slowly. seconds the system is armed. - Page 3 TAMPER ALERT If the alarm was triggered while away from the vehicle, the siren will chirp 3 times on disarming for tamper indication. The triggered zone will be shown on the optional 2-way LCD transmitter display. AUTO REARM If the system was armed for at least 10 seconds, the Auto Rearm feature allows the system to automatically re-arm itself 30 seconds after disarming.
-
Page 4: Valet Mode
VALET MODE When the system is placed into the Valet Mode the security and remote start features will be disabled. However, the optional keyless entry and trunk release features will still function if installed.The valet mode may be accessed with either the valet switch or a remote transmitter. - Page 5 To activate anti-carjack protection: 1. Make sure the ignition is on and all doors are closed. 2. Press the valet switch once. If the carjack feature is triggered: • The LED will flash rapidly. • Warn Trigger will activate after 30 seconds.
-
Page 6: Surf Mode
SURF MODE The Surf Mode allows the system to be armed or disarmed using just the key and override switch. While in surf mode the transmitter may be safely left at home or inside the vehicle’s trunk when engaging in an activity that may damage the transmitter such as surfing, swimming, white-water rafting, going over Niagara Falls in a barrel. -
Page 7: Manual Transmission Mode
To resume driver control: 1. Unlock the doors by pressing transmitter button 2. 2. Turn on the ignition. • The vehicle resumes driver control, when the brake pedal is pressed. AUTO COLD START This feature allows the system to start and run the vehicle every 1, 2, 4, or 12 hours (selectable by your installer) in a 24 hour period.This allows the engine to remain at an operational... -
Page 8: Status Indicator (Led) Functions
LED AND PARKING LIGHT INDICATIONS STATUS INDICATOR (LED) FUNCTIONS On Solid = Valet Mode Slow Flash = System Armed Rapid Flash = Passive Arming Rapid Flash while Ignition on = Open Zone Warning Rapid Flash while Ignition on and Anti-Carjack Mode Active = Entering Carjack Warning Stage Double Flash = Auto Cold Start Mode Activated TRANSMITTER FUNCTION QUICK REFERENCE... -
Page 9: Remote Transmitter Layout
OPTIONAL 2-WAY TRANSMITTER WITH LCD DISPLAY OPERATING INSTRUCTIONS REMOTE TRANSMITTER LAYOUT Button 3 Button 4 Button 2 Button 1 5-Button 2-way LCD Transmitter Each LCD transmitter button has two operating modes: standard and level shifted. Pressing a transmitter button for less than one second activates the standard function associated with that button (such as arm or disarm). - Page 10 OPTIONAL 2-WAY TRANSMITTER INDICATIONS The optional 2-way LCD transmitter displays more than 20 different screens to provide real-time indications for feature activation and system status. the different display indications are shown below for reference. Silent Arm Disarm Door Open Hood Open Trunk Open Warn-Away Trigger Shock Sensor Trigger...
- Page 11 Ignition Key On Brake Pedal Cold Start Passive / Last Door Arm Immobilize Low Transmitter Battery Range Indicator Button Lock Anti-Carjack Mode...
-
Page 12: Before You Begin
VEHICLE SECURITY SYSTEM Optional Remote Start Module and 2-way Transmitter Instructions Included INSTALLATION INSTRUCTIONS BEFORE INSTALLING THIS PRODUCT PLEASE READ THE INSTALLATION DIRECTIONS THOROUGHLY!! BEFORE YOU BEGIN This system is compatible with electronic fuel injected engines only! Not intended for use with carbureted engines. - Page 13 ALARM MODULE WIRING 6-Pin Door Lock Harness Plug-in connector port for door lock harness. See Door Lock Wiring Diagrams • BLUE/BLACK WIRE - Lock relay N/C (87a). • BLUE WIRE - Lock relay Common (30). • GREEN WIRE - Unlock relay Common (30). •...
- Page 14 output (+/-) 10A relay. Used for vehicle’s with independent left and right parking light circuits; see GREEN/BLACK wire. • YELLOW WIRE - +12V Ignition input. Connect to a main ignition wire at the ignition switch harness.This wire shows +12V when the ignition is on and while cranking.
- Page 15 • BLACK/YELLOW WIRE (small) - not used. • BLACK/YELLOW WIRE (large) - Start output (+). Connect to the vehicle’s starter wire. NOTE: If using the supplied starter defeat/anti- grind relay socket, the large BLACK/YELLOW wire should be connected to the same point as the solid BLUE wire from the relay socket.
-
Page 16: System Programming
SYSTEM PROGRAMMING Entering Programming To enter System Programming 1. Turn on ignition. 2. Within 5 seconds, press valet the proper number of times for the desired mode: 5 presses = Alarm Programming 10 presses = Remote Start Programming • The siren will chirp to indicate programming mode entered: 5 chirps = Alarm Mode 10 chirps = Remote Start Mode... - Page 17 unlocks when ignition is turned off.The system will not lock if any door is open when the ignition is turned on. Brake/On mode- the doors will lock after closing all doors and pressing the brake pedal with ignition on; the doors will unlock when ignition is turned off.
- Page 18 Remote Start Programmable Features 1. Engine Run Time. Selects between 10, 15, 20, and 30 minute run cycles. 2. Turbo Timer Feature. For vehicles equipped with a turbocharger, this feature allows the engine to continue running for up to 6 minutes after the ignition is turned off, so the turbo has time to cool down.
- Page 19 9. Diesel Wait-to-Start Mode. Selects between the 10 second countdown timer for diesel vehicles without a glow plug wire, or between glow plug wire monitoring for vehicles with a wait-to-start indicator light. REMOTE START DIP SWITCHES 1. Tachless Mode Crank Time. OFF= standard (0.8 seconds) crank time.
-
Page 20: Adding Transmitters
BYPASSING FACTORY THEFT DETERRENT SYSTEMS Many newer vehicles are now factory-equipped with anti-theft systems that use either a resistor coded key or a passive transponder that disables the fuel system unless a properly coded key is inserted into the ignition cylinder. To integrate a remote starter into these vehicles, you must determine which type of factory anti-theft system is equipped, then use... - Page 21 STARTER DEFEAT RELAY WIRING DIAGRAMS The Starter Defeat/Anti-Grind relay socket can be wired in either normally closed or normally open configuration. In either configuration, the Starter Defeat relay also provides Anti-Grind protection during remote start control, to prevent accidentally grinding the starter if attempting to start the vehicle using the key.
- Page 22 RELAY WIRING DIAGRAMS HORN HONK DIAGRAMS DOME LIGHT DIAGRAMS DEFROSTER DIAGRAMS TRUNK RELEASE DIAGRAM OPTIONAL HEADLIGHT ACTIVATION Program the Auxiliary output for timed operation and the headlights will turn on with Auxiliary for the preset timer duration then automatically turn off. Program the Auxiliary output for latched operation and the headlights will turn on with Auxiliary and remain on until the Auxiliary function is pressed again.
-
Page 23: Door Lock Wiring Diagrams
DOOR LOCK WIRING DIAGRAMS NEGATIVE PULSE LOCK SYSTEM POSITIVE PULSE LOCK SYSTEM ADDING ACTUATORS VACUUM LOCK SYSTEM REVERSE POLARITY LOCK SYSTEM NOTE: The Black/Red door lock polarity input wire connects to the short Red or short Black wire in the 14- pin main harness depending on door lock circuit type. -
Page 24: Alarm Module Wiring Diagram
ALARM MODULE WIRING DIAGRAM 3-Pin Data-Link cable 2-Pin Shock Sensor module side view OPTIONAL START MODULE WIRING DIAGRAM Starter Test Button RPM Signal LED © 2004 Blue Black/Red Blue/Black Green Black/Red Green/Black Black Blue Black/Yellow Orange/Violet Blue/Red Orange/White Trunk input (-) Green/Black Green/Yellow Yellow...