JVC KD-R525 Instructions Manual page 15

Menu item
SUB.W LPF * 9
SUB.W LEVEL *
HPF
BEEP
TEL
MUTING * 10
AMP GAIN * 11
SSM
MONO
IF BAND
IPOD SWITCH
* 12
13
AM *
F-AUX * 13
R-AUX * 13
* 9
Displayed only when <L/O MODE> is set to <SUB.W>.
* 10
This setting does not work if <BT ADAPTER> is selected for <R-AUX> of the <SRC SELECT>.
* 11 The volume level automatically changes to "VOLUME 30" if you change to <LOW POWER> with the volume level set
higher than "VOLUME 30."
* 12
For KD-R526/KD-R525: Displayed only when "USB-IPOD" is selected.
* 13
Displayed only when any source other than "AM/ F-AUX/ R-AUX/ BT AUDIO" is selected separately.
Selectable setting, [Initial: Underlined]
LOW 55Hz / LOW 85Hz / LOW 120Hz : Frequencies lower than
55 Hz/85 Hz/120 Hz are sent to the subwoofer.
9 00 — 08 [ 04 ] : Adjusts the subwoofer output level.
ON : Activates the High Pass Filter. The unit selects the cutoff frequency to the rear
speakers. / OFF : Deactivates (all signals are sent to the rear speakers).
ON / OFF : Activates or deactivates the keypress tone.
ON : Mutes the sounds while using the cellular phone (not connected through
KS-BTA100). / OFF : Cancels.
LOW POWER : VOLUME 00 – VOLUME 30 (Selects if the maximum power
of each speaker is less than 50 W to prevent damaging the speakers.) /
HIGH POWER : VOLUME 00 – VOLUME 50
Displayed only when the source is "FM." For settings, see page 7.
Displayed only when the source is "FM." For settings, see page 7.
AUTO : Increases the tuner selectivity to reduce interference noises between adjacent
stations. (Stereo effect may be lost.) / WIDE : Subject to interference noises from adjacent
stations, but sound quality will not be degraded and the stereo effect will remain.
HEAD MODE : Controls iPod playback through the unit. / IPOD MODE : Controls
iPod playback through the iPod/iPhone. / EXT MODE : The sound of any functions
(musics, games, applications, etc.) running on the connected iPod/iPhone is emitted
through the speakers connected to this unit. The display always show "EXT MODE."
ON / OFF : Enable or disable "AM" in source selection.
ON / OFF : Enable or disable "F-AUX" in source selection.
ON / OFF : Enable or disable "R-AUX" in source selection. / BT ADAPTER : Selects if
the rear auxiliary input jack is connected to the Bluetooth adapter, KS-BTA100. (page 9)
The source name changed to "BT AUDIO."
ENGLISH 15